Its time for the Party to begin!
3 posters
Page 1 of 1
Its time for the Party to begin!
Well I finally made it. My name is Kenny and I was one of the original member of both High School Jeepers and American Jeepers. I currently beat the crap out of a 95 YJ and honestly don't know how it is still together. I have wheeled at Rausch with Ryan(Goldensahara) and Wes(Invertchaos) and wheel almost every other weekend at a local legal spot. I currently am a student at SUNY Maritime College and am in the process of starting an offroading club on campus.
PS: I like pictures.
PS: I like pictures.
Bear94- Posts : 3
Join date : 2012-12-11
Age : 30
Location : Monroe, NY/ Bronx, NY
Re: Its time for the Party to begin!
CMA_Rider wrote:Welcome
Bout time for a lift?
Lift? I don't need no stinkin lift! lol My frame is rotting pretty bad so I am not going to put to much money into this jeep. Just waiting for it to fall apart and I will get another one with a solid frame. I may get a Aussie for the front and one for the rear just for S's and G's. I saw a brand new D35 aussie for cheap on craigslist and i'll get a new one for the D30.
When I get my next YJ i'll just swap the axles in. I'm going to try and get a 6cyl next time and with the 4.10s in my current axles my crawl ratio will be pretty good and even with no lift, the lockers will help me. Ill eventually get an 8.8 and a 2.5 inch lift and 35s, Ill just cut the body away. In the end I want a Spring over on stock spring with a shackle reversal 37s, maybe 40s if I get tons under it.
Bear94- Posts : 3
Join date : 2012-12-11
Age : 30
Location : Monroe, NY/ Bronx, NY
Re: Its time for the Party to begin!
Bear94 wrote:CMA_Rider wrote:Welcome
Bout time for a lift?
Lift? I don't need no stinkin lift! lol My frame is rotting pretty bad so I am not going to put to much money into this jeep. Just waiting for it to fall apart and I will get another one with a solid frame. I may get a Aussie for the front and one for the rear just for S's and G's. I saw a brand new D35 aussie for cheap on craigslist and i'll get a new one for the D30.
When I get my next YJ i'll just swap the axles in. I'm going to try and get a 6cyl next time and with the 4.10s in my current axles my crawl ratio will be pretty good and even with no lift, the lockers will help me. Ill eventually get an 8.8 and a 2.5 inch lift and 35s, Ill just cut the body away. In the end I want a Spring over on stock spring with a shackle reversal 37s, maybe 40s if I get tons under it.
No waggy springs w/ stretch?
Re: Its time for the Party to begin!
CMA_Rider wrote:Bear94 wrote:CMA_Rider wrote:Welcome
Bout time for a lift?
Lift? I don't need no stinkin lift! lol My frame is rotting pretty bad so I am not going to put to much money into this jeep. Just waiting for it to fall apart and I will get another one with a solid frame. I may get a Aussie for the front and one for the rear just for S's and G's. I saw a brand new D35 aussie for cheap on craigslist and i'll get a new one for the D30.
When I get my next YJ i'll just swap the axles in. I'm going to try and get a 6cyl next time and with the 4.10s in my current axles my crawl ratio will be pretty good and even with no lift, the lockers will help me. Ill eventually get an 8.8 and a 2.5 inch lift and 35s, Ill just cut the body away. In the end I want a Spring over on stock spring with a shackle reversal 37s, maybe 40s if I get tons under it.
No waggy springs w/ stretch?
Forgot about that, lol. My plan changes about every other week. I kind of have a plan to completely re-do the mounting points of the leafs to give me stretch from stock spring and pull them up higher to lower the rig but still stay spring over. But thats pretty far down the road.
Bear94- Posts : 3
Join date : 2012-12-11
Age : 30
Location : Monroe, NY/ Bronx, NY
Re: Its time for the Party to begin!
Bear94 wrote:
Forgot about that, lol. My plan changes about every other week. I kind of have a plan to completely re-do the mounting points of the leafs to give me stretch from stock spring and pull them up higher to lower the rig but still stay spring over. But thats pretty far down the road.
I understand that.....I always find cooler things!
Re: Its time for the Party to begin!
MrLawMoose wrote:Bear94 wrote:
Forgot about that, lol. My plan changes about every other week. I kind of have a plan to completely re-do the mounting points of the leafs to give me stretch from stock spring and pull them up higher to lower the rig but still stay spring over. But thats pretty far down the road.
I understand that.....I always find cooler things!
x2
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|